We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1996 Ford Bronco 5.8L V8 Gas Air Intake
Cold Air Intake - High-flow, Roto-mold Tube - FORD F150, BRONCO V8-5.0/5.8L for 1996 ford bronco 5.8l v8 gas
w/Mass Air, w/o Mass Air
Overview
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty™
- Will not void vehicle warranty
Detailed Info
| Estimated Horsepower Gain | 10.22 HP @ 4201 RPM |
| Replacement Filter | RU-1041 |
| Air Filter Color | Red |
| Air Filter Material | Cotton Gauze |
| Air Filter Outlet Shape | Round |
| Clamps Included | 8 |
| Clamp Material | Stainless Steel |
| Clamp Style | Regular |
| CARB EO Number | D-269-26 |
| Couplers Included | 3 |
| Type | Gen II |
| Estimated Torque Gain | 12.8 lbft |
| Product Style | 57 Series FIPK |
| Alternate Replacement Filter | RF-1041 |
| Intake Pipe Color / Finish | Black |
| Intake Pipe Material | High-Density Cross-Linked Polyethylene |
| Street Legal In All US States | Legal for use in all 50 states. |
| TUV Approved (Europe) | No |
| Weight | 11.5 lb (5.2 kg) |
| Product Box Height | 10.5 in (267 mm) |
| Product Box Length | 35.5 in (902 mm) |
| Product Box Width | 13.25 in (337 mm) |
| Mounting Hardware Included | Yes |
| Warranty | No-Hassle Lifetime Limited |
DIY Level
Easy Moderate Advanced
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Resources:
Installation PDF
Installation Instruction Sheet Horsepower Guarantee Dyno Chart - 1995 Ford F150 5.0L - 10.22HP Increase
Cold Air Intake - High-flow, Roto-mold Tube - FORD BRONCO, P/U for 1996 ford bronco 5.8l v8 gas
w/Mass Air, w/o Mass Air
Overview
- Guaranteed horsepower gain
- Designed to improve throttle response and engine sound
- Easy to install, usually in 60 minutes or less
- Replaces entire factory air intake system
- Not legal for highway use in states adopting California emission regulations
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
Detailed Info
| Estimated Horsepower Gain | 9.79 HP @ 3787 RPM |
| Estimated Torque Gain | 13.6 lbft |
| Air Filter Color | Red |
| Air Filter Material | Cotton Gauze |
| Air Filter Outlet Shape | Round |
| Clamps Included | 5 |
| Clamp Material | Stainless Steel |
| Clamp Style | Mini |
| Couplers Included | None |
| Replacement Filter | RF-1012 |
| Product Style | 63 Series Aircharger Kits |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. |
| TUV Approved (Europe) | No |
| Top Material | Stainless Steel |
| Weight | 6.1 lb (2.8 kg) |
| Product Box Height | 12.25 in (311 mm) |
| Product Box Length | 20.25 in (514 mm) |
| Product Box Width | 12.25 in (311 mm) |
| California Restricted | Not legal for sale or use in California |
| Mounting Hardware Included | Yes |
| Warranty | No-Hassle Lifetime Limited |
DIY Level
Easy Moderate Advanced
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Resources:
Installation PDF
Installation Instruction Sheet Horsepower Guarantee Dyno Chart - 1997 Ford F250 7.5L - 9.79HP increase
Search By Vehicle
Search By Dimension
The item you added to cart DOES NOT FIT your
This item fits your
